|
| |
| Glas-Craft Guardian A5
- Air Power |
|
5” Air Motor
 The
design of the Guardian Air motor delivers efficient, consistent trouble
free operation.
While most air powered equipment employs trip rods and
mechanical spools to reverse the air motor direction of travel; the
Guardian uses air signals to reverse air motor direction.
This requires no maintenance or routine adjustments.
Moisture and humidity have less affect on GlasCraft’s air motor compared
to electric driven systems. And if needed can be easily serviced in the
field. |
|
Air Power - Reliable, Maintenance Free Performance
 With
all TIER #1, Hydraulic and TIER #2, Air and Electric spray machines -
you require compressed air. The minimum volume of air is 15 cfm @ 100
psi. This amount of air would be necessary for the operation of the
transfer pumps and the air purge on the spray gun. With the Guardian Air
Powered spray system - you will need more air than the 15 cfm necessary
for Hydraulic or Electric spray equipment.
But, the additional volume of air needed is minimal!
Based on typical spray applications, dispensing 1 gallon
(10 pounds) of material per minute, you will only require 9 additional
cfm of air for operation of the Guardian spray system compared to
Hydraulic or Electric powered machines. An additional 9 cfm in air
volume needed will have little or minimal effect on:
-
The size (horsepower) compressor you select
-
The footprint of that compressor
-
And most importantly, the cost of that compressor
With the addition of a few more cfm in air supply, you
gain the outstanding performance characteristics of the Guardian Air
Powered Spray System.
|
|
No
order too small