|
| |
CPI is the oldest authorized distributor and dealer for GlasCraft. CPI is a
value-added merchant and wholesaler for the Guardian
sprayer and foam machine or coating machine. foam insulation, fiberglass,
cellulose, h20, h25, h20/35, hv20, h-2000,, mmh, glas-craft,
glascraft, gsmer, gusmr, foam, insualtion, poyuretane, polyretane,
polyurethane, polyurethane, schaum, ausschauemen, spritzschaum, spritzen, 2-component, transfer pump, husky, ipm, allegro, icynene,
low-density foam, hydraulic,, foamer, foam roofer, hydralic,
hydrolic, demilec, hxp2, xp2, h-xp2, electric, reactor, reactor, spray-in-place
foam
|
Guardian A5 Series… Economy Without Compromise
The Guardian A5 represents
an important milestone in Glas-Craft's product philosophy - an specific
system designed for residential insulation. Residential foam insulation
is the fastest growing segment within all contracting businesses simply
because it offers extreme energy savings to home owners while being
environmentally friendly, mold resistant, and without health impact. The
Guardian caters to the needs of the insulation contractor. It features a
small footprint so it will fit through any door. All controls are in
easy reach. The key components such as heater system, hose heat and
solid state state electronics were all borrowed from Glas-Craft's
top-of-line hydraulic systems. In other words, this is a small
professional
polyurethane spray system that is easy on your budget and easy to use! |
|
Glas-Craft Guardian A5
Click on the photo to see a larger
image!
Key Applications
- Residential Insulation
- Roof Repair
- Packing Application
- Small Commercial Insulation
Key Materials
- Polyurethane Foam
- Polyicynene (Icynene)
Literature
Manuals
|
Guardian
A5
Compact and User Friendly!
|
The Guardian System
-
Maximum fluid pressure - 1600 psi
-
Output range < 0.5 to 2.0 gal / min (2 to 8 l
/ min)
-
Maximum hose length - 310’ heated hose
-
Maximum heater temperature - 190°F (71°C)
-
Fluid section
displacement per cycle -
(.042 gal / cycle)
24 cycles = 1 gallon
-
75 volt variable transformer for hose heat
-
Solid state electronics package
-
LED cycle counter
-
CE design configuration
-
Independent Iso, Poly & Hose heat controllers
-
True flow hose electrical connectors
-
Overpressure / overtemperature safety circuits
-
The new Iso piston lubrication system:
enclosed piston lubrication system that circulates pump lubricants
in a sealed environment, providing longer seal life further reducing
scheduled maintenance
-
Air manifold incorporated in the system design
for additional air distribution outlets and regulators for transfer
pumps and mixers
-
Retract switch for the air motor is a quick
and easy device to always keep your pumps in the down position at
the end of the day.
Iso pump lubrication
system
Click on the photo to see a larger
image!
|
SYSTEM SPECIFICATIONS |
|
Maximum Output |
20 lbs / 9 kg per minute |
|
Maximum Automatic Heated Hose Length
|
310 ft / 95 m |
|
Primary Heater |
A5-6000 - 3000 watts per side (6000 watts
total heat) A5-12000 - 6000 watts per side (12000 watts total
heat) |
|
Maximum Material Temperature |
190ºF / 88ºC |
|
Electrical Requirements |
Single Phase 220 VAC 50 amp 50 / 60 Hz |
|
Three Phase 220 VAC 25 amp 50 / 60 Hz
|
|
Three Phase 380 VAC 25 amp 50 / 60 Hz
|
|
Air Requirement at 1 gpm (3.8 lpm) Output
|
24 cfm @ 100 psi 680 l / min @ 6.8 bar
Includes air transfer pumps |
|
Glas-Craft Guardian A5... Available in CPI Spray
Rigs! Nobody builds nicer ones than we do!
The Guardian A5 is available online. To check
current pricing, please click on your desired configuration below:
220x1,
6000 Watts
220x3,
6000 Watts
220x1,
12000 Watts
220x3,
12000 Watts
|
No
order too small
