|
| |
proportioner, metering unit,
sprayer, dispenser, foam machine, coating machine, plural-component,
polyurethane, polyurea, gusmer, graco, spray foam, foam insulation, fiberglass,
cellulose, mmh, glas-craft,
glacraft, glascraft, gsmer, gusmr, foam, insualtion, poyuretane, polyretane,
polyurethane, polyurethane,
low-density foam, hydraulic, guardian, foamer, foam roofer, hydralic,
hydrolic, demilec, spray-in-place
foam
|
Guardian MMH - Mobile, Modular, Hydraulic Spray System
The Guardian MMH represents
an important step for GlasCraft and the entire two-component spray
industry: a radical change from the past. It was in 2006 that Glascraft
introduced the MMH, a package of modules to accommodate the sometimes
scarce "real estate" in mobile rigs or in plants. The modules can be
mounted on walls out of the way. More importantly, these modules may be
configured to meet the needs of the end user.
|
|
Glas-Craft Guardian MMH
Click on the photo to see a larger
image!
Key Applications
- Residential Insulation
- Roof Repair
- Polyurea for roofs, industrial
applications, secondary containment
- Commercial Insulation
Key Materials
- Polyurethane Foam
- Polyicynene (Icynene)
- Polurea
- Polyurethane Coatings
Literature
Manuals
|
Guardian
MMH
Modular, compact and a layout matching the customer's requirements!
|
The Guardian MMH System
-
Maximum fluid pressure - 2250 or 3200 psi
-
Output range < 0.5 to 2.2 gal / min (2 to 8.6 l
/ min)
-
Maximum hose length - 310’ heated hose
-
Maximum heater temperature - 190°F (71°C)
-
75 volt variable transformer for hose heat
-
Solid state electronics package
-
LED cycle counter
-
CE design configuration
-
Independent Iso, Poly & Hose heat controllers
-
True flow hose electrical connectors
-
Overpressure / overtemperature safety circuits
-
The new Iso piston lubrication system:
enclosed piston lubrication system that circulates pump lubricants
in a sealed environment, providing longer seal life further reducing
scheduled maintenance
-
Air manifold incorporated in the system design
for additional air distribution outlets and regulators for transfer
pumps and mixers
-
Retract switch for the air motor is a quick
and easy device to always keep your pumps in the down position at
the end of the day.
Almost no floor space
is needed to accommodate this system
|
SYSTEM SPECIFICATIONS |
|
Maximum Output |
22 lbs / 10 kg per minute |
|
Maximum Automatic Heated Hose Length
|
310 ft / 95 m |
|
Primary Heater |
MMH 206/306: 3000 watts per side (6000 watts
total heat)
MMH 212/312: 6000 watts per side (12000 watts total
heat) |
|
Maximum Material Temperature |
190ºF / 88ºC |
|
Electrical Requirements |
206/306: 220x1 50 amp
212/312: 220x1 85 amp |
|
206/306: 220x3 25 amp
212/312: 220x3 35 amp
|
|
206/306: 220x3 25 amp
212/312: 220x3 25 amp |
|
Air Requirement |
none for proportioner, 13 cfm @ 100 psi (680 l / min @ 6.8 bar)
for gun and transfer pumps |
|
Glas-Craft Guardian MMH... Available in CPI
Mobile Spray
Rigs! Nobody builds nicer rigs than we do!
The Guardian A5 is available online. To check
current pricing, please click on your desired configuration below:
220x1,
6000 Watts
220x3,
6000 Watts
220x1,
12000 Watts
220x3,
12000 Watts
|
No
order too small
