 |
Phone: |
(330) 861-5200 (877) CPI-2600 |
CPI is Partner with Industry
Leaders. |
|
|
|
Glas-Craft Maxi II
Summary Glas-Crafts Maxi is a pneumatic system. It sprays or pours a maximum of 14 lbs./min (6.3 kg/min.) of polyurethane foam or adhesive. The system is compact. The controls are easy to use. Basically, this machine is suitable for lower output or even occasional use.
Typical Applications Application of spray foam Application of stud wall insulation Slightly less than medium output Suitable for stationary deployment in OEM settings
Application Benefits Fixed proportioning unit always on ratio Double acting, positive displacement pumps which provide constant flow Easy-access design, permitting quick service of the unit 5" air motor develops up to 1,600 psi
Features It features two separate primary material heaters. Two positive displacement pumps are connected to one five-inch air motor to ensure the proper mixing pressure (up to 1600 psi/100 bar) and 1:1 ratio. The heated hose can extend up to 100 long with no additional power supply. Heating capacity is up to 140oF or 60oC.
Options Probler gun extension (made by CPI) Drum feed pumps
System Operating Specifications Air requirements: 24 cfm @ 100 psi 680 l/min. @ 6.8 bar Electrical requirements: 25 amps, 208-240 VAC, Single Phase 50/60 Hz Maximum Hose Length: 100 feet 30.4 meters Recommended Hose Package
21403-50 GC High Heat Extension Hose Assembly, 50 ft.
*** Click here
for important product change! ***
Pricing
Please check our warehouse (click the link at the top of this page)
Specifications
|
|
Send email to
with questions or comments about this web site.
|
No
order too small
