 |
Phone: |
(330) 861-5200 (877) CPI-2600 |
CPI is Partner with Industry
Leaders.™ |
|
|
|
Features The MH is equipped with two 7,000 watt primary material heaters that will generate 190 oF material temperature even at maximum output! The automatic heated hose can extend up to 310’ long with no additional power supply. There are separate digital temperature controls for the automatic hose and each primary heater, allowing precise temperature control within +/-2oF. The thermocouple reads the actual material temperature in line, eliminating all temperature guess work.System Operating Specifications Air requirements: 15 cfm @ 100 psi 425 l/min. @ 6.8 bar Electrical requirements: 63 amps 208 VAC Three Phase 60 Hz Maximum Hose Length: 310 feet 90 meters Recommended Hose Package
• 22023-00 GC High Heat Extension Hose Assembly, 50 ft.
Pricing
Please check our warehouse (click the link at the top of this page)
Specifications
|
|
Send email to
with questions or comments about this web site.
|
No
order too small
GlasCraft
has introduced the MH Dispensing System to meet the demanding requirements both
in terms of high pressure and very high output. The MH will accurately meter,
mix and dispense polyurethanes and polyureas, with no solvents needed! Equipped
with mighty 14,000 watts of heating power, the MH is capable of 190oF/88oC
constant running temperature while producing up to 3,000 psi. At the same time,
this system will produce up to 45 lbs./min (20.4 kg/min.) which is the highest
output of any machine designed for mobile deployment in the field. Nonetheless,
the compact design and ease of operation make it an ideal system for both in
plant and on site applications.